Turbo Tools V3 - Turbo Render, Temporal Stabilizer, & Turbo Comp. Dramatically speed up Cycles renders and compositing!

72 ratings
I want this!

Turbo Tools V3 - Turbo Render, Temporal Stabilizer, & Turbo Comp. Dramatically speed up Cycles renders and compositing!

3d illusions
72 ratings

Major Feature Release - Turbo Tools V3 now with Temporal Stabilizer and the option to use animation optimised sample pre-sets!

Turbo Tools is a full rendering pipeline addon, compatible with all operating systems and hardware supported by  Blender. It automatically sets up render settings and dramatically reduces Cycles render time whilst also improving quality. The addon includes:

  • Turbo Render - Vastly superior render in a fraction of the time for both CPU and GPU Cycles rendering. Retains image quality the standard denoisers can't maintain, in some cases even when providing them with images rendered for 120X longer! For complex scenes you can expect your single frame renders to be reduced from several hours to several minutes! For scenes that already render very quickly, the speedup is less pronounced, but the quality of textures and geometry detail will generally be vastly superior. Check out this demo where Turbo Render is used to help a gtx1070 destroy a 4090!
  • Temporal Stabilizer - Although only a single checkbox, this massive new feature provides per pass temporal stabilization, allowing animation render times of static scene elements to be reduced by up to 40x! Check out the YouTube introduction video to find out more:
  • Turbo Comp - A full compositor suite with real-time playback and compositing directly in the compositor backdrop, branch caching, resaving of file output nodes without re-rendering, automatic file output node creation, publishing and lots more.


In difficult to render scenes (indoor scenes, volumes, scenes containing glossy materials with detailed textures, SSS, etc) Turbo Render provides results that OIDN/Optix could require you to render up to 120x longer in order to match Turbo Render's results. When no denoiser is used you could expect to render up to 960x longer to achieve the same results produced by Turbo Render (scene dependant). Additionally it simplifies the entire rendering process thanks to render setting pre-sets designed to help you get the result you need without diving into the complex render settings. It even works with complex compositing setups without the need to do any rewiring yourself! The results are remarkable as can be seen below.

Classroom scene using the new draft mode. Total render time (including denoising) was under 17 seconds on a gtx1070 with an i7-7700k !!!!!!!!

The following tests were created using cycles X in blender 3.1. To give OIDN and Optix the best possible chance, they were set to use albedo and normals to assist with the denoising process. OIDN had Prefilter set to Accurate, and I also tried setting prefilter to NONE to see if it would improve the texture comparison results (it didn't).

Scene 1 - heavy DOF , strong SSS, film set to transparent to test alpha.

Click here to download test scene 1

Turbo render is able to maintain reflection clarity at extremely low samples. OIDN required over 4 minutes of rendering to achieve a similar quality.

The image is rendered with film set to transparent to produce an alpha channel. The white background (top of the image) is then added in the compositor to highlight the difference in quality. OIDN required a 4 min render to get close to Turbo Render's 10 second render result, but there was still visible noise (video to follow)

Scene 2 - Indoor scene to test geometry detail and texture detail. (scene 2 Available from the shop.)

Above we can see that even after 30 minutes of rendering, OIDN is still unable to retain as much texture detail as Turbo Render can at on 1 min!

Even with a 15 second render, that's a whopping 120x faster than the 30 min render used by OIDN, Turbo Render can still maintain texture detail using it's 'Enhanced Textures' option:

Above we can see that the bottom of the cupboard area is getting quite badly mangled up by OIDN and even worse with OPTIX. This is because denoisers can struggle with dark edges of geometry that meet with shadows due to a lack of contrast. Turbo Render can achieve much better results using it's 'slow (all passes mode), even at very low samples (as shown above bottom right).

Below shows that even when rendering at 1 min per frame (240x less time per frame than the ground truth 4 hours per frame), we can still get excellent results without any noticeable flicker. To do this with OIDN and maintain the same geometry, texture and reflection detail we'd need to render at 30 mins per frame (as can be seen in the above texture comparison still image examples, and youtube video examples athttps://www.youtube.com/watch?v=toManFMUSFQ ).

Notice how turbo render (on the right) has vastly superior image quality when compared to OIDN (left). The most noticeable improvements in this image are the crisp shadows on the notice board and the clarity of the reflections under the desk.

The UI is very simple to understand, and offers options to ensure the best possible results for any scene and sample settings.


It's extremely important to understand that Turbo Render can only provide a speed up if the samples are set lower than when you weren't using Turbo Render. This is because Turbo Render provides a speed up by being able to produce high quality results from renders that are too noisy for the denoisers in the render panel to produce high quality results from. So take the samples as low as possible without reducing image quality, either by using the sample pre-sets, or using the 'user' sample pre-set mode which allows you to enter the sample setting manually.

It's also important to understand that the biggest gains (often several hours) are to be had on renders that take a long time when not using Turbo Render.  Scenes that already render quickly (a minute or two) can't be reduced as significantly.  For scenes that already render quickly it's advisable to use the 'fast/draft' denoise mode unless you notice wobbly geometry, or if you need to work with the individually denoised passes in the compositor after rendering).  Here's a video explaining the use of draft/fast mode: https://www.youtube.com/watch?v=HzCm_vp6R2M

Turbo Render is designed with ease of use being a top priority. In the Turbo Render Options area, simply click enable, choose a sample pre-set to automatically set up the sample settings to the desired quality, choose the cleaning mode (combined image or clean passes), tell it what's in the scene, and render. That's it! Turbo render will then analyse the scene and other render settings to produce the final render. IMPORTANT ensure a default project cache folder for new scenes is specified in the addon preferences, and that each scene has a valid cache folder set prior to rendering. The scene's cache folder can be set at the bottom of the Turbo Render options, or in the compositor's N panel turbo tab. If you the 'User' sample pre-set, then to achieve the biggest speed gains, you should reduce your samples below what you would usually need. The cache folder must not be a relative path (a path that starts with '//'), so when setting it, make sure you uncheck the relative option in the Blender file explorer as shown below:

Turbo Render is compatible with:

  • Still renders
  • Animations
  • Existing compositor trees
  • Rendering of multiple scenes and view layers from a single compositor (all scenes will use their own Turbo render settings).
  • All Turbo Comp features (caching, publishing, resaving file output nodes without re-rendering etc)


Denoising Modes -

  • Draft (clean image pass only) - The new draft mode offers extremely fast denoising, and when combined with the 'enhance textures' option will provide results that could be considered to far surpass what would be expected of a draft render, even at extremely low samples. Also suitable for renders which render to a denoisable level in under 10 seconds, thanks to it's fast processing times.
  • Medium (clean image pass only) - The medium option is slightly slower than Draft, but on noisier images will offer better all round detail, particularly in reflections.
  • High (clean image pass only) - The high mode will offer the best lighting, shadows and reflections of all but the ultra mode. This is suitable for final renders where the individually denoised passes aren't needed for compositing.
  • Ultra(cleans all necessary passes)- This will clean individual passes for use in the compositor afterwards, and can also be used to resolve any geometry wobbliness present in lower pre-sets. The passes which are cleaned is decided by scene content and render settings. This mode can also be used if the other modes are not producing good geometry detail. IMPORTANT - If you intend to use the individually cleaned passes in a 3rd party compositor, you can either use the render layer cache exr's found in the cache folder you set, or if you prefer another format, you can set up a file output node directly from the render layer node. Blender's output can be set to something light such as a ffmpeg because it's only able to output the denoise image pass, not the other denoised passes. If your passes include data passes such as cryptomattes, it's advisable to use EXR 32 bit.

Cycles Speedup Options -

  • Optimise HDRI - This will optimise the importance map, leading to potentially faster renders and less RAM usage. The improvement will be most noticeable with HDRI world environments which are 8k or above, and will reduce memory consumption during rendering by around 1GB for a 16k HDRI.
  • Prevent Fireflies - Recommended. This will reduce the chance of fireflies and also provide a potentially massive render time reduction (scene dependant).

Sample Pre-sets - A quality level for every occasion. No more messing about trying to find the ideal render sample settings, simply choose the desired quality and hit render. Modes include: Crap, Medium, High, Ultra, Insane, User. For animations you may want to use your own sample settings, as these have been optimised for fast still images. Using them for animation may cause inconsistencies between frames.

Recommended minimum sample presets to use for each denoise mode:

Very Dirty - Very dirty should be used if you're using very low samples or still have noise in the image after it's been denoised.

Interior Scene - Adjusts the render pre-sets to produce better results for interior scenes or scenes with a lot of indirect illumination.

Animation- This will optimise your chosen sample pre-sets for animations.

Enhance Textures - This will ensure that texture detail is maintained even at very low samples. In draft mode it will also improve reflections and shadows.

Visible to Camera - Use these options to specify what the camera will be able to see. This in combination with various other render settings (light bounces, film etc) enables the system to choose the optimal approach to ensure the best results. Uncheck what's not needed to ensure the fastest processing time. Turning on Heavy DOF/Motion Blur, Emission, and enabling the 'behind volume' sub options is not always necessary (particularly at higher render settings), so try leaving those off for increased performance, only enabling if you notice noise around the edges of objects, or noise behind volumes.

Problem Solving - Automatically fix common rendering issues if they're visible after rendering. Only enable if you encounter problems, because if the problem isn't present the workarounds will be detrimental to rendering speed or glossy levels (depending which you enable). IMPORTANT - If you enable the 'swirly/blotchy artefacts' option, and you also have the 'animation' option enabled in the turbo render options, then it's advisable to change the sample pre-set to 'user', disable the noise threshold checkbox, and set your own samples. The reason is, when the swirly artefacts option is enabled, adaptive sampling is disabled, meaning the max samples will be used for each pixel, and because the animation options increases the max samples to at least 600 (even for crap sample pre-set), you'll have potentially unnecessarily long render times.


  • IMPORTANT - Make sure you have selected the lowest possible sample pre-set for your scene. Turbo Render's speed gain is only achieved when using lower samples than you would usually use. Find the optimum setting quickly by rendering a small render region of the noisiest area of the render. Repeatedly render and reduce the samples until you find the lowest number of samples that don't negatively impact image quality, then turn off the render region before rendering properly. For the most control, consider using the 'User' sample pre-set mode, as this will allow you to optimise noise threshold, min and max samples.
  • A render layer cache folder is set, and it's not a relative path. It needs to be an absolute path such as 'c:/something/something/' and not '//something/'
  • Make sure you have 'very dirty' enabled at low samples, otherwise you'll get noise even after denoising.
  • Make sure you put a tick in the visible to camera section for every surface type in the scene. Failure to do this will result in un-denoised elements. Don't tick options that aren't in the scene, otherwise this will increase render time unnecessarily.
  • If your camera has strong DOF or motion blur and you notice noise in those areas after rendering, be sure to tick the 'Heavy DOF/Motion Blur' option.  You can tell if the scene has DOF if near or far objects are blurry compared to the focal point.
  • Avoid enabling 'optimise HDRI' in scenes that don't use a HDRI in the world environment, or if the HDRI is lower resolution than 4096 pixels wide.
  • Only use the 'avoid fireflies' option in scenes with very strong lighting or a hdri, otherwise the brightness of highlights and reflections will be impacted.
  • Blender's own output is not set to multilayer EXR. If you need multilayer EXR In your third party compositor, you should use the render layer cache generated by turbo render instead.
  • Avoid the principled BSDF's Sheen option for optimal results. You can use a layer weight and a mix node into the base colour instead:

  • IMPORTANT - if you've already rendered with Turbo Render previously, check the compositor node tree doesn't have any small minimised nodes covering the render layer node. On extremely rare occasions Blender fails to run the queued up python scripts after rendering completes. This results in the turbo render not being able to put the compositor tree back to it's pre-render state which will lead to incorrect render results when next rendering. It's extremely rare, and only usually happens if system resources are dangerously low. If it happens, remove the additional nodes, check the links are correct, and turn off any render passes that shouldn't be on. See troubleshooting for more details.

The new Draft mode is able to produce surprisingly good results even at extremly low samples. This is the classroom scene rendered in 16 seconds on a gtx 1070 using only 12 samples! On a more modern GPU such as a mid range 3070, this would complete in under 5 seconds based on Blender's benchmark website!

Command line rendering

To render from the command line use:


blender -b "E:\blender\benchmark scenes\classroom\Classroom.blend" --python-expr "import bpy; bpy.ops.threedi.render_animation()"

Still image:

blender -b "E:\blender\benchmark scenes\classroom\Classroom.blend" --python-expr "import bpy; bpy.ops.threedi.render_still()"

If you want to set other things such as output directory, frame range, etc, then refer to:


Full Video demonstration showing Turbo Render and Turbo Comp here:


Due to a Blender limitation/Bug, it's not currently possible for the addon to support Fast GI Add mode. Bug report here: https://projects.blender.org/blender/blender/issues/105332

Trouble Shooting

The render menu is empty - You have a conflicting addon, most likely one that modifies menu's such as the 'Clean Panels' addon. In the case of the Clean Panels addon, adding Turbo to one of it's panels will resolve. If it's not Clean Panels, then try installing Turbo Tools after starting Blender in factory mode to ensure there are no conflicts. You can open blender with the factory start-up using the file named  'blender_factory_startup.cmd' from the blender folder. After installing Turbo Render in factory mode you can then re-install your old addons until you find the addon responsible for the conflict. Ensure that addon is turned off when using Turbo Render in future. Also check Turbo Tools is assigned the f12 and ctrl f12 keys in the Blender preferences.

When using higher sample pre-sets I get strange swirly artefacts - There is currently an issue with Blender's adaptive sampling, which can cause swirly artefacts with AI denoisers. It doesn't happen often, but is most likely at high sample settings, and in areas of a render that receives insufficient samples (such as when the rays are widely scattered by a close by volume). You can see the bug report here: https://developer.blender.org/T99135.

To fix the issue, you can either:

Tick the 'swirly/blotchy artefacts' checkbox in the problem solving area and re-render.


If you want to fix it manually, you can set the sample pre-set to 'user', then scroll down to the render sample settings (shown below), untick the noise threshold, and then manually set the samples. To find the best sample setting, draw a small render region around the part of the render which takes the longest to clear up during rendering, and then repeatedly render, lowering the sample each time, until you start to notice a loss in details/quality. During this process, ensure you have the 'render region' and 'crop to render region' checkboxes ticked in Blender's output properties, to make sure only the small region is being denoised and not the areas of the image outside of that region.

This is currently part of a high priority list of cycles improvements at the Blender Foundation - https://developer.blender.org/T74581, so should hopefully be fixed by the Blender developers in the near future.

The render layer cache isn't there after a render, or when I press refresh all - The cache folder must not be a relative path (a path that starts with '//'), so when setting it, make sure you uncheck the relative option in the Blender file explorer as shown below. If you've already rendered with it set to a relative path, that's fine, the cache has been created, so all you need to do is change it to an absolute path, and then click refresh all. The render layer cache will then be loaded in.

The image doesn't get denoised even if Turbo render is enabled - This is caused by another addon assigning itself to the f12 key before Turbo Render can. To check this you can open the render menu and check if 'Turbo Tools Render Still Image' shows 'f12' to the right of the menu entry. If not, you can either launch it directly from the menu, or you can right click the menu item and choose to assign the f12 key manually (same for 'Turbo Tools Render Animation'). There's nothing I can do about this behaviour, as it's completely luck of the draw which addon will be registered first.

This could also happen if you've packed the cache exr into the .blend file, as Blender will force the cache node to use that instead of the most recent render result, unpack the exr and click 'refresh all' to load in the most recently rendered cache file.

Turbo Render takes longer to render than Blender's denoising options - Render time is identical, but dependant on the mode chosen, the denoising process afterwards can take approximately 5 to 20 seconds longer (i7-7700k), but because the results are superior, you can lower the render settings to more than compensate. For the fastest possible denoising time, make sure you have set the Turbo Render options to represent your scene accurately, turning on Heavy DOF/Motion Blur and Emission is not always necessary (particularly at higher render settings), so try leaving those off for increased performance.

Turbo Render isn't providing any speed gains - Turbo Render's speed gain is only achieved when using lower samples than you would usually use, and the biggest gains (often several hours) are to be had on renders that take a long time when not using Turbo Render. Scenes that already render in under a minute can't be reduced as significantly, but will generally be far higher quality regarding textures and details. For these already fast to render scenes, always use the 'fast/draft' denoise mode unless you notice wobbly geometry, or if you need to work with the individually denoised passes in the compositor after rendering). For maximum speed up, find the optimum sample setting quickly by rendering a small render region of the noisiest area of the render. Repeatedly render and reduce the samples until you find the lowest number of sample that don't negatively impact image quality, the turn off the render region before rendering properly. For the most control, consider using the 'User' sample preset mode, as this will allow you to optimise noise threshold, min and max samples.

I don't see much of an improvement - Turbo Render will provide the biggest improvements with scenes that are difficult to render and have multiple passes (diffuse, glossy, transmission, emission, etc), for example indoor scenes with lots of indirect lighting, scenes with very fine detailed texture information on reflective surfaces, volumes, heavy SSS, etc. For scenes that already render quickly you should use the Draft denoising mode to avoid unnecessary processing times.

For scenes that only have data on one pass (such as glossy indirect but virtually nothing on glossy direct), a multipass denoiser such as Turbo Render can't offer any benefits due to the nature of multipass denoising. In this case you could either use the standard OIDN from the render panel, or if you want to take advantage of the non denoise features Turbo render provides such as 'enhance textures', firefly removal' and 'Optimise HDRI', use Draft mode to avoid unnecessary processing.

My animation has flicker - The render settings are not high enough. If using one of the render pre-sets, then it's recommended to use the 'high' setting as a minimum. In the kitchen scene above high took just over 1 minute per frame including denoising (still a huge improvement on the 4 hours per frame without denoising). You could also use the new temporal stabiliser in the compositor panel (only available if the scene was rendered with Turbo Tools (with or without Turbo Render)).

When I have the real time compositor enabled in the 3d viewport, I only see a static image - The viewport compositor needs the render layer node to be wired up in the compositor. If you have a render layer cache node in the compositor, you’ll just get a static image of the last rendered image in the 3d viewport when the real time compositor is enabled.

So if you have render layer cache node, before using viewport compositing, it’s necessary to click the render layer node, and click cache/uncache. That’ll remove the render layer cache node and wire back up the render layer node. The cache node will be automatically re-created and wired up next time you render, or if you want to get it back before that, you can just click refresh all in the compositor to automatically bring it back and wire it up 

Blender Crashes - This could happen if there's a conflicting addon or if you've accidentally download the wrong zip file for your Blender version. First check the zip file ends with your Blender version, for example, 'blender_turbo_boost_v_2_0_5_ for blender3_1_0' is only compatible with blender 3.1.0. If you are using the correct zip file, try installing the addon after starting Blender in factory mode to ensure there are no conflicts. You can open blender with the factory start-up using the file named  'blender_factory_startup.cmd' from the blender folder. After installing Turbo Render in factory mode you can then re-install your old addons until you find the addon responsible for the conflict. Ensure that addon is turned off when using Turbo Render in future. Another possibility is that you're using E-Cycles with it's own denoiser enabled (Turbo Render is not currently tested with any engine other than Cycles, but I intend to look into ensuring full compatibility with other engines such as E-Cycles at a later date).

Blender becomes unresponsive - If your system only just meets the minimum system requirements, or you're rendering at massive resolutions, you may have insufficient system resources, leading to prolonged processing times/unresponsiveness. Try closing all other open programs before trying again, if you still have issues, then it's likely your system doesn't meet the below system requirements, in this case you should only use fast mode, as this is the least system intensive. Alternatively you may have chosen a cache location with insufficient space for the cache files.

I've set Blender to output a multilayer exr, and even though I have Turbo Render set to the 'Ultra' denoising mode, the passes aren't cleaned in the resulting exr file blender generates - Blender can only output the cleaned image pass, all other passes will be un-denoised, instead you can either use the render layer cache files directly in your 3rd party compositor, or the second option is to connect a file output node to the render layer node or the render layer cache node, and set it to multilayer exr. In the Turbo Comp panel you can use the 'create and wire' operator to automatically add the file output node for you.

I've set Blender to output a multilayer exr, and in the resulting EXR file there are additional passes that I didn't enable - Blender's own output should be set to something like such as ffmpeg or jpg, and then in your third party compositor you can use the render layer cache EXR's generated by Turbo Tools instead. This is necessary becuase Turbo Render needs to enable additional passes during rendering so that it can operate correctly, so if you set Blender's output to multilayer EXR, then those additional passes will be captures, whereas only the passes you select are stored in the Turbo Render cache files.

Unicode error when pressing f12 - Ensure you have no special characters in the scene name, camera name and viewlayer name.

The render layer cache doesn't match the render/chosen Turbo Render settings - You've packed the render layer cache exr so it's using the packed version. Unpack the file and then click refresh all or render again to update to the correct cache file on disk.

Blender error 'Failed to write to tile' - This is a non addon related error which generally means there's insufficient disk space in the temp directories cycles uses. Clear some disk space, and also consider placing Turbo Tools compositor cache directory on a different drive, as this can grow quite large for long animations.

When I render with Turbo Render disabled, the compositor still generates a render layer cache node - This is correct behaviour, Turbo Tools will always generate render layer cache even if Turbo Render is not enabled. This is necessary so that you can utilise all the tools in the Turbo Comp panel (caching, publishing, resaving of file output nodes, etc). If you don't want this to happen while the addon is installed for some reason, you can perform a standard render by using alt f12 (still image), or alt ctrl f12 (animation). Make sure you hook back up the render layer node before doing this (see the cache/uncache section of the instructions above)

The same frame keeps being rendered, even during an animation - You've packed the cache file, which results in the packed EXR always loading instead of the most recent rendered frame's cache EXR.  Unpack the cache file, then click refresh all to reload the cache EXR for the current frame.  Make sure you don't have 'Automatically pack resources' enabled in the file/external data menu.  To unpack, click this button on the render layer cache node:

and choose this option:

Parts or all of the render are black after using Turbo Render - Firstly make sure your computer meets the minimum specifications below for the resolution you're trying to render. If so, check the f12 key is assigned to the turbo tools render operations, check the below troubleshooting step (nodes left in the tree after rendering). If non of the above, then this is a known bug in Blender that affects the open image denoiser (which this addon uses). In that case please subscribe to one of the many open bug reports on the blender bug tracker. Here's one of them: https://developer.blender.org/T76668 . In the meantime, try and reduce system resource usage during rendering, and if possible render at a lower resolution, or on a machine with more RAM.

The denoising process is suddenly taking an excessive amount of time - See below section, and if that isn't the cause, then the resolution is too high for your CPU to denoise quickly. In this case make sure you only have the necessary visible to camera options checked otherwise the denoising will be taking a long time needlessly. You can also change to a lower denoise mode, which will still provide excellent results at higher resolution but denoise much faster.

After rendering there are nodes in the compositor that shouldn't be there and the render is now returning the incorrect result. Also often results in Error message 'NoneType' object has no attribute 'name'-

the small minimised nodes over the red render layer node shouldn't be here after rendering

For reasons not related to the addon, extremely rarely after rendering completes, Blender will fail to execute queued up python functions.  This results in the Turbo Tools functions that return the tree to it's pre-render state to not get executed.  For this reason it's always a good idea to render in the compositor workspace so you can compare the tree before and after rendering. It's most likely to occur if the system resources become insufficient, or if lots of things are changed in quick succession immediately before rendering, such as muting, moving, rewiring, or changing parameters of nodes. To avoid in future (if system resources aren't the cause), wait a couple of seconds after modifying the tree before rendering.

If it happens and you've done nothing else since rendering, press ctrl z to put the tree back to it's pre-render state, then press 'refresh all' in the compositor's turbo tools panel to refresh the cache with the new render data.

If you can't use ctrl z because you've done other things since rendering, then you'll need to manually fix the issue with the following steps:

move the render layer node to the left:

select the little ones:

press ctrl x to remove them:

maximise the render layer node, and move the link to the correct socket on the render layer node:



turn off any passes that shouldn't be enabled (turbo render will have turned on additional passes before beginning rendering so that it can multipass denoise).  Generally the sockets shown on the render layer cache node indicate which passes you had on previously if you're unsure.



Recommended Minimum System Requirements

CPU - Quad Core that runs at over 4ghz (The processing is multithreaded, so the more cores the better. Anything below 4ghz will still work, but the processing times may be unacceptable on low core count machines)

Ram - for a 1080p render, 3gb to 4gb of memory should be free prior to starting rendering (This memory requirement will quadruple each time you double the render resolution. For example 4k renders will require approximately 12gb to 16gb of free ram. If your system has paging turned on, then when ram is depleted the hard drive will be used instead, which will be very slow)

Operating system - Any

Hard Drive Space - Sufficient space for the cache files (at 16 bit, approx 50MB per render layer node per frame + 5MB per standard 30% cache node)

Turbo Comp

Turbo Comp provides massive compositor speed-ups thanks to an intuitive caching system. It's also where you publish your final composition and remove temporal flicker from animations.

Turbo Comp:

An intuitive collection of compositor tools to massively speed up your workflow.

The blender compositor is where you can take a turd and polish it into something exceptional.  The pros don't spend hours trying to get everything right in the 3d viewport, or spend huge amounts of time re-rendering every time a client needs an amendment.  Instead the majority of the work to get a render looking incredible, is carried out in the compositor.  This is why at the last Blender conference, the entire audience voted that the compositor be the next focus for development. 

V1 of this addon addresses many of those needs by adding :


Cache entire branches of a node tree to ensure fast performance.

Real-time Compositing 

Add, tweak, and cache all in real time. 

Real-time Graph Editor

modify graph editor curves in real-time via the graph editor for real time automation!

File Output Node Tools

One of the longest requested features for blender is to be able to resave a file output node without having to re-render the 3d scene....well now you can!  Even better, this feature isn't limited to single frames, you can actually resave all frames in a single click.

Not only that, you can also press a single button to generate and wire up file output nodes with the output destination automatically populated too! 


One click publishing temporarily discards any cache and exports your node tree at full quality to a movie file or image sequence.  This can be done as many times as necessary as it doesn't require the 3d scene to be re-rendered.  Audio can be included in the resulting file by adding the audio strip to the VSE. With the 'remove temporal flicker' option enabled, animation flicker will also be removed during the publishing process, allowing you to render animations up to 40x faster!

Automatic rewiring of your existing node trees

Hit render, sit back and it's all done for you.  Automatically works with even the most complex of existing compositor node tree.

Auto rename group inputs

No more wasting hours renaming group inputs. Select the group, click rename group inputs from source option, and you're done!

Full Tutorial


  1. download the addon
  2. go to the blender preferences -> addon section
  3. choose to install
  4. choose the zip file you've downloaded
  5. IMPORTANT! Set the cache location in the preferences or in the compositors N panel.  This should be a non system drive for maximum performance and stability.  Ensure this is set to something unique for each project to avoid overwriting any cache you haven't finished with.
  6. render the scene (the compositor will automatically generate the render layer cache for you.)
  7. go to the compositor (if you're not already there) and start compositing.

For best performance, place a cache node on a single wire that leads to the composite and viewer nodes before rendering, this will generate lower quality cache in addition to the full quality render layer cache, ensuring faster playback due to it only needing to load the smaller standard cache EXR each frame rather than the full resolution cache EXR.

The Caching System:  

Scene Cache Folder

The location that the current scene's cache and standard cache will reside on your computer. This can be accessed from multiple computers at once, for example if one is rendering and you want to begin compositing on a different computer before rendering has finished. This is also a full render management system which allows you to automatically reload the cache in any blend file that has matching credentials (scene name, camera name, viewlayer name). For this reason be careful not to change scene,camera and viewlayer names after rendering, otherwise the cache won't be found.


Enable this if you want all frames to be cached. When disabled only the latest render cache and standard cache files will be kept.

Validate Cache

When enabled this will check that nodes downstream of the cache node still have the same parameter values, and if not will automatically recalculate the tree and update the cache files for just the necessary frames. This can be very slow, so only use it after adding a new cache node, or if you know the cache is out of date (for example if you've changed a property on a node which is downstream of the cache node). Only applicable when animation is enabled. No need to enable directly after rendering, as all the cache will have been created during rendering so it's guaranteed to be up to date at this point.

If you find that the cache is not being updated for some reason (i.e. if you've changed something other than a node parameter such as resolution), you can select cache nodes and click 'clear cache of selected'. This will delete the cache from disk and force an update.


This will cache the selected nodes at a resolution determined by the 'new cache resolution' slider, or if they're already cached, will uncache them. Avoid caching render layer cache nodes, as this may cause issues with automatic rewiring following a render.

If you press this with a cached render layer node selected (not a render layer cache node), then all render layer cache nodes for this render layer node will be discarded and their links moved back to the render layer node, useful for returning the tree back to it's original state before sharing the file with someone who doesn't have the addon. The render layer cache EXR file will remain on disk to avoid accidentally losing potentially thousands of frames of render data, so these will need to be deleted manually from the specified cache folder. Standard cache node EXR's will be deleted from the cache folder as these can be re-created without the slow process of re-rendering the 3d scene.

Cache Resolution

Determines the resolution of new cache nodes. This will need to be set appropriately for your system to avoid too much frame dropping. On a i7 7700k 30% provided fast FPS when the main render output was set to 1920 x 1080.

Refresh All

This will update all standard cache nodes for the current frame. Will also generate cache nodes for uncached render layer nodes if cache files exist in the cache directory (means you can never lose your work, even after closing blender without saving!).

Refresh Selected/Upstream

This will refresh only the selected cache node and any cache nodes that rely on it upstream. This saves time unnecessarily refreshing downstream nodes that you know are up to date, particularly if those downstream nodes rely on nodes that take a long time to calculate (denoise nodes etc).

Clear Cache of Selected

This will delete the cache from the hard drive but will not remove the cache node. Handy if you need to force the cache to update.

File output node section

You can select a node or multiple nodes, then hit 'create and wire'.  This will generate a file output node for each selected  node, automatically create the links, and specify a directory and file name to save to.  

The only wired option will only wire up the sockets on the selected node, if the socket already has a link.


Select the file output nodes that you want to generate new images, and then either click resave current frame, or resave all frames (creates an image sequence for the entire animation length as set in the render properties)


Sync Mode

If you notice playback is slower than the scene FPS, then you can choose 'frame dropping' from the menu, this will skip some frames to preserve the correct FPS. Ideally this should be set to 'Play Every Frame' if you have 'Validate Cache' enabled, otherwise cache regeneration will become quite sporadic during playback. This will also affect the 3d viewport, so be sure to change back before switch back to the 3d viewport.

Important performance consideration.

  • Only enable the passes you actually need. The more passes, the bigger the cache file, and the slower the load time.
  • Reduce the tree to a single cache node if possible. This will prevent the render layer cache node which may have many passes from re-loading during playback.
  • In the addon preferences, consider lowering the render layer cache bit depth to 16bit, as this will reduce the cache file size considerably, leading to faster load times.


Publishing will temporarily discard the cache nodes you've manually created , and save the frame or animation with the location and format specified in Blender's output settings.  Audio will also be included in any movie formats if you have audio in the VSE (ensure no video is present in the VSE otherwise it will take precedence over the compositor). Animation flicker will also be removed during publishing if you enable the 'remove temporal flicker' option.

Publish Current Frame

Saves the result of the compositor as a still image to the location and format specified Blender's output property panel.

Publish Animation

Saves the result of the compositor as an animation or image sequence to the location and format specified Blender's output property panel.

Remove Temporal Flicker

This deceptively unassuming checkbox is actually a huge feature which in as little as half a second per frame will remove denoiser induced animation flicker that would usually require much longer render times to avoid. In combination with the animation option sample pre-sets, you could expect to reduce render times by as much as 40x! Fully compatible with all other publishing features, and each pass will be stabilised separately to ensure upstream nodes provide the best possible result. If using multiple render layer nodes and standard cache nodes, you can choose which ones get stabilised by simply selecting them before publishing. Cycles can only generate the necessary data if motion blur is disabled in Blender's render settings, so ensure this is disabled before rendering (you can still add motion blur by enabling the vector and depth passes and then feeding them into a vector blur node in the compositor).

Temporal Troubleshooting

Anti-Aliasing isn't very good around the edges of objects that pass directly of the background environment, or I get ghosting - Try rendering with film set to transparent in the render settings panel, and then add the environment in post using the environment pass. The Alpha channel should then resolve the issue.

Object behind Transparent objects don't stabilise correctly - Increase the alpha threshold property in the viewlayer properties passes section. Making it higher than the transparency value of the material will ensure the objects behind the transparent object generate the vector data necessary for stabilisation to work.

Limitations: The stabiliser is best suited to static scene elements.   Animated objects such as characters or complex machinery should be rendered in a separate viewlayer or scene with transparency enabled in that scene's film options.  Afterwards you can add a render layer node for that scene/viewlayer to the main scene's compositor, and recombine with an alpha over node.  If they still produce artefacts during stabilisation, you can publish again with stabilisation disabled for just the problematic render layers using the selective stabilisation functionality. 

Objects whose motion can't be described by the vector motion pass Blender creates, should be excluded from stabilisation. For example, objects in a mirror wont have vector data because only the mirror object will have vector data, not the objects reflected in it.  The same applies to the environment, because it's not a 3d object. For a mirror you would render it in a separate viewlayer or scene, and for the environment you could do the same, or you would turn on transparent film and add the environment back in after stabilisation.

Process RGBA separately

Temporal stabilisation will process each colour channel individually. This is slower, but will do a better job of avoiding artefacts. It's recommended to try with this option disabled initially unless there are objects in the scene moving across non geometric backgrounds such as a HDRI environment.

Include File Output Nodes

With this option enabled any unmuted file output node will generate a new image sequence at full resolution (handy if you want to generate multiple variations).  Note that only the active composite node can generate movie files with audio.

Quick Publish

Quick publish will use the cache to publish without recalculating the tree. For this reason, it's a good idea to drop down a 100% cache node after parts of your node tree that you don't intend to edit after rendering, this will generate cache during the render ( a huge advantage vs taking your renders to a 3rd party compositor).

View Published Image

This will open the published image file in the image editor.

View Published Image

This will open the published animation in Blender's animation player.

Cover image bicycle (pre-rocket) created by Ruff on Blendswap. Find more of his work at: https://blendswap.com/profile/26107

I want this!
1,077 sales

Tools to DRAMATICALLY speed up Cycles rendering and compositing!

Blender versions
2.93 - 3.6 Alpha


(72 ratings)
5 stars
4 stars
3 stars
2 stars
1 star